Yeah you mean like this! (This is not mine; I took the pic at Jasper!!)
Casey it looks like you really got it goin on, thanks so much for your offer of help.
I agree a timer or other system is no help if the setup isn't right, it will just help you be out-of-shape more consistently! :laughing
So here are the answers to your questions on setup:
6.25" setback. Titus 200 mod case. 12V trim. And you hit the nail on the head, there is no long "trim bolt" but the guy who set the boat up before has two bolts, one each in the first holes of the trim limit because he couldn't get the long bolt in there owing to the rear wings of the boat and the tight clearance. So the motor is limited downwards at the first hole (closest to the transom) by these bolts, to save the lower unit from hitting the hyd ram cylinder I am guessing.
Let's see..what else can I tell you, OK the thing was set up at 1.25" ABOVE the pad, I dropped it recently to even with the pad.
PS, WHERE can I get a carbon-fiber-looking dash overlay, to re-do my gauge setup? The dash has holes where they don't need to be!!