Search results

Brand new $1,500 These are the 300PM and 300X style mid. They will work on any 3L/3.2L efi or opti with any cowl with a little knowledge and a few modifications. let me know if you have any questions.

For sale is a 33p hydromotive 4 blade with the big barrel. Prop is flo torque hub system. Blades have been profiled, balanced, blueprinted and the barrel has been trimmed. Dual (8) PVS holes. $650

30p hydromotive 4 blade big barrel. This prop is hubbed for a fat shaft 19 spline prop shaft. 1" vent holes. Blades have been profiled, balanced, blueprinted and the barrel has been trimmed. $650

29p hydromotive 4 blade big barrel. This prop is hubbed for a fat shaft 19 spline prop shaft. 1" vent holes. Blades have been profiled, balanced, blueprinted and the barrel has been trimmed. $650

looking to trade an oval one-piece 2.5 plate from a 260 with the smaller (lighter) steering boss for a larger steering boss 280 plates to run latham wing plate steering.

Billet 3L and 3.2L sportmaster/torquemaster/fleetmaster driveshaft 4 seal carrier This is the cure for water entering your gearcase at the drive shaft seal. The factory part is plastic that flexes and only holds 2 seals. $100 without seals $125 loaded with seals plus shipping

I am having some lightweight billet compressor pulleys made like the ones that come on the xs and pro xs motors to replace the factory steel ones on the standard opti. There is a huge weight savings and helps cool the compressor also! This will fit 2.5L/3L/3.2L Mercury optimax motors...

I have for sale a factory 15" mid section for a 2.5L 280. This will work with most 2.4 and 2.5L powerheads. It has the long trim ram, one piece exhaust adapter plate and the snout is not cut. $4,000

They changed the rules in Super Stock class and am Looking to trade a few 8600 rpm boxes for stock ROS boxes.

Not sure exactly what brand. It has a new 15 spline small shaft Mercury hub. It's marked 27P. $200

15 spline small shaft. Could probably use a new hub. $250

http://www.bbcboards.net/motors/37283-2-6-yammie.html Lightweight small block yamaha! figured someone here might be interested in this since he's almost giving it away. $6,500

For sale is the Original yellow fast cat that was used in the magazine reviews. 2001 fast cat 2006 300xs 2008 rocket aluminium anodize serries tandem axle trailer Dan bought the boat from Mike (fastcat300) in 2010 and did a complete rerig including new: offshore wingplate steering, bobs...

2007 merc 115 optimax 4 sale. $4500 Fresh water motor from Tennessee. This is a 20" It was just professionally rebuilt by my merc tech. It is fresh and has been run on the stand. Thanks, Todd (239)293-4731

This is a brand new never run CLE in the original shipping box! This will fit 2.5L and 2.4L motors but not a 3L. $2,000

Hydromotive quad 4 prop in a 32 pitch. Fat shaft hub included, 1" vent holes and the barrel has been shortened for reduced stern lift. $550

Custom built 3.3L Mercury Stroker motor. It sits on a 2005 20" 300x offshore midsection. The powerhead is identical to the one that Hydrilla sold. It has the down draft intake and the 300x style electronics that Eric Simon did the Motorola ecu on. It still has the factory oil injection but it...

1993 mercury 260 drop on powerhead complete with electronics. Motor is still complete sitting on a stand, I am selling powerhead only. I bought it off a friend who is a Merc certified Mechanic who built it for his STV. Motor has around 30 hrs since he rebuilt it. Motor has one inch spacer...

2000 Mercury 240 efi ecu $300

Spinelli brothers 30P DR 4 blade with a 15 spline small shaft merc hub, will fit yamaha also. $400