Billet sportmaster driveshaft seal carrier

Todd D

Active Member
Joined
Mar 11, 2008
Messages
97
Points
8
Location
Naples, Fl.
Billet 3L and 3.2L sportmaster/torquemaster/fleetmaster driveshaft 4 seal carrier



This is the cure for water entering your gearcase at the drive shaft seal. The factory part is plastic that flexes and only holds 2 seals.


$100 without seals
$125 loaded with seals

plus shipping
 

Todd D

Active Member
Joined
Mar 11, 2008
Messages
97
Points
8
Location
Naples, Fl.
TTT

Also have the billet shift shaft seals holders available now!

This unit has an added seal over the factory unit. Your option with or without the vent tank kit.

$100 without seals
$125 with seals but without the vent tank
$175 with the billet vent tank kit

 
Last edited:

Todd D

Active Member
Joined
Mar 11, 2008
Messages
97
Points
8
Location
Naples, Fl.
These were made so you can snap them into the factory old style harness mount!

 
Last edited:

Todd D

Active Member
Joined
Mar 11, 2008
Messages
97
Points
8
Location
Naples, Fl.
Yes, both of these will fit any 3L sportmaster on any EFI/DFI/optimax/pro xs/ xs/ 3.2L 300xs stroker.

The drive shaft 4 seal housing will also fit Gen 1 torquemasters!
 
Top