JWolff
Active Member
I have always liked the idea of a bench in the back of my 2+2 but not the idea of stepping on the vinyl to get to the rear deck. So instead of buying the very nice full bench i opted with going for the bass boat look where the center is a fold down seat that replaced the trash can in the 21's. I got the insert from Allison and found the seat on Amazon. Still needs to be reupholstered but it is close enough for now. Also had Allison install the female side of the seat mount when I bought the insert and the male side was screwed to the bottom of the Amazon seat. To get an even height across the 3 seats a 1" spacer was also used on the middle seat. About $500 total into it before seat reupholster.
Since the seat is on the 3/4" pin it is not as stable as the trash can when going up and down to the rear deck but it works good enough when the kids have friends coming along to board or tube.
Since the seat is on the 3/4" pin it is not as stable as the trash can when going up and down to the rear deck but it works good enough when the kids have friends coming along to board or tube.
Attachments
-
64.4 KB Views: 56
-
116.5 KB Views: 55
-
114.7 KB Views: 62