TB21
Active Member
Anyone know of power poles being mounted on the XB21 , ifso what amout of set-back is needed for the mounting brackets?
Thnx,
TB
Thnx,
TB
There's a white/black one i saw at Pickwick this weekend with twin powerpoles but I didn't get close enough to see exactly how they were mounted.[/QUO
Probably Bobby Simmons from Lawrenceburg. I think he fished a tourny Sat on Pickwick. He has 2 power poles on a 21 Bass Sport Pro. Neal he has been at Fast Pass. I will see if I can get some pics in the next couple days
and text them to you. If im not wrong he has 2 brackets that mount between the jackplate and the wedges then the motor. Then they bend around the back of the boat. Pics will show...
That's who it was. I've seen the boat at FastPass before.There's a white/black one i saw at Pickwick this weekend with twin powerpoles but I didn't get close enough to see exactly how they were mounted.[/QUO
Probably Bobby Simmons from Lawrenceburg. I think he fished a tourny Sat on Pickwick. He has 2 power poles on a 21 Bass Sport Pro. Neal he has been at Fast Pass. I will see if I can get some pics in the next couple days
and text them to you. If im not wrong he has 2 brackets that mount between the jackplate and the wedges then the motor. Then they bend around the back of the boat. Pics will show...
TB - thought about a Minn Kota Terrova? It has an anchor function that uses GPS to keep the troller within a 5 ft radius, prolly lighter, cheaper and better looking than two power poles sticking out of the rear of the boat..... IMO....Anyone know of power poles being mounted on the XB21 , ifso what amout of set-back is needed for the mounting brackets?
Thnx,
TB
TB21 ---- I did talk to Bobby Simmons and he said that when he orderd his power poles they didnt fit because the brackets was to short. If I understand him , Lawrenceburg Marine called them and said they were to short and had a set of custom brackets made for the 21. Now in saying that, he said that they need to be a inch or 2 higher on the bend on the bracket. He said that it catches to much water when taking off so he put a piece of aluminum bent at 90 degrees under the power poles where they mount to the bracket. This helps with take off. I have pics to show everone if someone knows how to load them to the A board by I -phone. ( COMPUTER ILLERATE):beer: Too Many BEERS!!!!!! MY cell Is 931-629-3707
TB - thought about a Minn Kota Terrova? It has an anchor function that uses GPS to keep the troller within a 5 ft radius, prolly lighter, cheaper and better looking than two power poles sticking out of the rear of the boat..... IMO....
No, just reading about them....Not really.....Havent heard good things about the Terrova.
Do you have one?
Thnx,
TB