Kerry Cordy
Active Member
- Joined
- Jan 1, 2007
- Messages
- 109
- Points
- 18
The pump runs both up and down. It's a new install for my 280. I have the shop Manual. It says to fill it, leave the dip stick out and run it. The hoses are empty because they are new. I disconnected the up hose at the bottom of the ram, no trim fluid comes out. The pump simply is full but does not move the oil out of the resevoir. It runs but does not pump?? The pump came out of the boat I bought the 280 off. When you drain the pump and set it on the bench and roll it around does this cause a problem inside??? Ready first my first ride in my 2003/280. I thought this was going to be the easy part of the rigging. Thanks for your help,
Allen Cordy in Northern California.
Allen Cordy in Northern California.