countrycoolio
Member
I gots a problemo, I fried my TM at the FB rally, luckily I have a spare one, problem is a guy gave me the one that was on there which was a 12V , he wired it all up while my spare 24V was being fixed. So now I took the 12V TM off & went to hook up the 24V. He had 1 hot wire off the block taped up, I hooked it up where it was supposed to go, then changed the plug to go from 12 to 24, I plugged her in & I GOT SMOKE. Yanked it loose, swapped the red wires positions , plugged her in & got arc. To the best of what I know about these there aint but two ways to wire this animal up.
Is it possible that when the 24 v TM was being repaired, that they replaced the guts with 12v & this is causing the problems
Is it possible that when the 24 v TM was being repaired, that they replaced the guts with 12v & this is causing the problems