Bullet Cut

Dark Allison

Active Member
Joined
Sep 8, 2005
Messages
350
Points
18
Has anyone ever run a Bullet cut chopper or performer on thier boat and if so how did it perform!
 

hirk

Active Member
Joined
Feb 21, 2008
Messages
357
Points
28
Subscribed, very good question Ive never seen anything posted on this
 

GotMyAlly

Well-Known Member
Joined
Mar 15, 2005
Messages
4,907
Points
63
Location
Olive Branch, MS
I had one when I ran a 2003/225X. It ran pretty good once it hooked up, but it didn't carry the bow very well until you got the boat rolling about 70 MPH or so. Could be a fun play prop.....but not a fishing prop.
 

mittenbass

Active Member
Joined
Apr 29, 2012
Messages
77
Points
8
I have a 28p Bullet Cut Performer 4 that I run. It's a really good prop, the holeshot is better than every other overhub prop that I have tested. I have run it up to 91 mph on my XB21 2+2 w/250XS (1.62 gears). Its a keeper, but I do like my XOBs a little better. I picked up a 30p Bullet Cut Performer 3 this spring, but have not had a chance to try it yet. It might be too stiff for me to turn and it might not have enough blade area for my big Ally, but only time will tell. I will post again after I give the 3-blade a try.
 

90 5.0

Active Member
Joined
Jul 23, 2010
Messages
337
Points
18
Location
Atascocita,Tx
I ran both bullet cut choppers and performers on my 2003, they worked well on that hull for me with a fishing load.
 

Tim Powell

Active Member
Joined
Jul 2, 2015
Messages
198
Points
28
Location
Calvert City, Kentucky
I ran a 32 Bullet Cut Performer 4 on my XB21 BasSport Pro yesterday afternoon and this morning. The water sucked and the wind was a but much but it still turned out 99.8 @ 5640.

Id really like to find a 31 to get the rpm up around 5850ish.
 

suicidealli

Well-Known Member
Joined
Feb 20, 2008
Messages
4,206
Points
38
Location
Southern ky, lake Cumberland
I ran a 28 bullet cut chopper on my 02 for a while. I really liked it. Had a ton of lift, pulled good mph.
Great when I had a passenger and a load. I sold it to a friend that has an 02, and he is 315 lbs. He has ran it for 4 years,
Great for lift..
 

suicidealli

Well-Known Member
Joined
Feb 20, 2008
Messages
4,206
Points
38
Location
Southern ky, lake Cumberland
14.5, and had plenty of cup. It carried great, a handful top end for an 02. Better on an 03. They run great loaded and a passenger. Solo they aren't for top end. I ran my 28 on my drag too. Had to wheel it a little bit, but went 123. Not the ideal prop, but we had a long cruise. Low slip, and great mph in the 70-80.
 

Dark Allison

Active Member
Joined
Sep 8, 2005
Messages
350
Points
18
I got a chance to run the 4 blade bullet cut yesterday. It was a 15x26 it had great lift on my XTB21 . Two people loaded to fish
 
Top