Keith E.'s latest activity

Hi Keith, as you know I'm running the 175 Vmax SHO on my XTB21. Bob's big foot duel hose nose cone and Bobs torque tab on gearcase...

HaHa Thanks. Every time I think I need a bigger boat im reminded on those days your the only one on the lake and that feeling of speed...

Cool good deal.. The lip is very small even from the factory.. But it makes a huge difference in how the boat reacts to trim and engine...

I'd send that 28 chopper you have to Billy Eaves and tell him what you have and what you are trying to do.. He will fix you up.. That...

All, As the title says, I'm looking for any setup info from folks running a 4-stroke on an XTB21. I'm seriously thinking about trying...

Raising the motor to high will actually scub top speed because you lesson the leverage and have more wetted surface. 1/4 below 1/8 below...

28P Lightning ET, split the gearcase on engine height, and you should be within 1/4 inch either way of Nirvana if you have raised your...

I bought mine bout 20 years ago when I got the boat. I have not used the trolling motor in years but it is so low profile I never pulled...

I have a Minn Kota quick release on both my 2003 and my Champion. I swap the trolling motor between them.

So your at 15" of setback? 9" jack plate, plus 6' Hyd. What year is your Xb2003. I think there is a distance difference from the end of...

Bill told me to run 14" on my 89 and it worked real well with the 150pm in the low 80s and pulled skiers nicely too.

Late reply. I think they come as a pair. Here's the details Allison Project 150 mounts

Thanks. I be installing 10 inch jack plate tomorrow. Regular 4-stroke engine has 1 low water pickup on top side of gearcase so thinking...

Acceleration is good. Not the same as running 1/8 or 1/4 mile races. The way the 4 stroke works is if you get quick hole shots you will...

Yes, bushings were custom made by a skilled mechanic who has done this on many race boats engines, also his own. You can imagine the...