Who has run both a 28 ET and a 28 ChopperII???

[catfish123]

Who has run both a 28 ET and a 28 Chopper II on an XB2003 with a 225 Promax? What were your results in rpm's and GPS speed? Which prop do you like better and why? Thanks

 

[Bob Ant]

I would like to see that answer allso. PInkie, send me that 28ET of yours and I'll answer that question and send you the best one back

 

[John Richied]

Bob, you aren’t getting any of my ET’s… hehehe Now a lightened 260 flywheel, I can do that soon. Did you ever get a 260 16-amp stator?

I know a guy with a 28 Chopper running in the mid 90’s with a XB-2003 with fishing gear, trolling motor and all. His 225 ProMax has an SVS, 34cc heads and a Rapair worked ECU… :wink:

 

[Bob Ant]

Im ready to do the deal on the flywheel when you're ready--just say the word. I'm getting the feeling you're afraid that the chopper II is gonna cut up that (exter terestial) ET of yours. I heard your ET works well on most brand name lawn mowers

 

[brotherxb03]

I never ran the ET wheel,but I am running a worked 28 chopper. I have a carb 2.5 200 with the heads milled,stacks on carbs,exaust bluprinted,boysen dual reeds. The boat has a awsome hole shot. I only ran it by myself with a full fishing load and batewell 1/2 full. The boat shows 65 mph a 5 grand,75 at 5300 with a 1/4 throttle left. It gets too much chime walk @ 75 for me to nail it. I have 14" set back with a hydralic plate. Tried from 1/2 below to 1/2 above on prop shaft runs best even to 1/2 above. I guy at the lanch with a drag 300 on a STV ays the mold work on my bob's needs to be perfected.