Where's all the GT-20 owners at?

Cybermerc150

Member
Joined
Dec 19, 2017
Messages
28
Points
3
Location
Massachusetts
Hey everyone! Noob here! Just bought my first Allison...GT-20 to be precise. Who else owns one? Post some pics and some info! I will be drag racing mine! Sort of a project...needs a deck from doner glassed back on. FB_IMG_1513464569386.jpg FB_IMG_1513464592343.jpg
 
Last edited:
Reactions: Jed

DOUBLE J

Active Member
Joined
Oct 17, 2006
Messages
382
Points
28
Location
Biloxi,MS
Thank you. I purchased the above one as a basket case and had it restored. I did the lay out, rigging etc...I have since sold it to Freebird. Who has kept it pretty much the same as I set it up.
 

Cybermerc150

Member
Joined
Dec 19, 2017
Messages
28
Points
3
Location
Massachusetts
Well...i haven't had good weather to glass the deck on yet...but i did start rigging the jackplate and mota' up and ill let the pics do the talking...lol
Also mocked up how im going to do my center steer seat setup
IMG_20180120_095758395.jpg
IMG_20180120_092930179.jpg IMG_20180120_092925561.jpg
 

Jed

Member
Joined
Jul 22, 2015
Messages
39
Points
8
Location
Texas
Nice project. Just saw you live in Massachusetts. I guess I won't complain about our weather. Y'all have had plenty of the nasty stuff. It's done nothing but rain down here for two months.
 

Cybermerc150

Member
Joined
Dec 19, 2017
Messages
28
Points
3
Location
Massachusetts
Nice project. Just saw you live in Massachusetts. I guess I won't complain about our weather. Y'all have had plenty of the nasty stuff. It's done nothing but rain down here for two months.
Ya...here if its not snowing...its too cold to glass still haha...and sadly i dont have a garage to work in or it would be done by now lol
 

Cybermerc150

Member
Joined
Dec 19, 2017
Messages
28
Points
3
Location
Massachusetts
I have gotten further along on my quest to have a drivable allison!
Decided to build a carb 260 for it instead of the 2.5 200 i was gonna build.
Heres some pics of the deck getting put onIMG_20180219_162214264.jpgIMG_20180219_161928965.jpg
IMG_20180219_162214264.jpg
3M 5200 was used to join the deck and hull together
IMG_20180219_155408206.jpg
She Fit damn Good! Looks like a boat now! But theres more...along woth the 5200...and im gonna nut and bolt the rubrail on...i also glassed the inside seam.
IMG_20180220_164550396.jpgIMG_20180220_164559304.jpg
That deck aint goin Nowhere
Hope you all enjoy
Ill make a post later today as i put the midsection back on and rig up steering
-Josh
 
Reactions: Jon
Top