I've had 5 allisons in the past(4 2003's and 1 2002), last time being early 2000's. Had a few other performance bass boats since then but decided to get back into an allison 2003. Running a 225pm on it with a b&b 26 trophy and a 26 chopper and wondering what props people are running with this set up these days. How high is the prop shaft and 12 or 24v trolling motor. I use to run a johnson 56# troller and it was more than fine for power.
Needing Some Setup Tips
- Thread starter aspb
- Start date
stuart gary
Active Member
running a 28 chopper 1/2 inch above pad with 24volt minkota, also run a 26hydromotive
I don't know that much has actually changed in the last 20 years. Some guys really like the Pro Max prop.
gmorgan
Active Member
- Joined
- May 13, 2014
- Messages
- 362
- Points
- 43
28P Lightning ET, split the gearcase on engine height, and you should be within 1/4 inch either way of Nirvana if you have raised your limiter. Might need a 30P if limiter is stock. My xb2003 is extremely sensitive to added weight. 180-pound partner slows it down five mph. So take what you need, not what you might need next time. 12.5 inch jackplate on mine.